Tiles and grout are the prominent areas in a house, which are exposed to dirt and dust. Cleaning the filth and spills from the tiles and grout is strenuous.
The extreme weather conditions in Boca Raton makes cleaning tiles and grout essential.
Cleaning the grout around the kitchen stove, refrigerator, and sink is an exhausting task, which seems almost unfeasible.
What’s more is that dirty grout can be a health hazard with molds and mildew growing all over!
If you haven’t been successful in cleaning floor grout, you would surely wish to get a hold of a magic product that will clean the grout in minutes.
Well, you’re in luck!
There are a cluster of products to choose from. , But choosing the right ones will consume time until you come across the perfect one.
Another disadvantage is that the products may contain chemicals, which emit harmful fumes, discolor your tiles, and put your family’s health at risk.
So to get your grout white again, follow eco-friendly steps below.
1. Wipe the Grout
Prior to using any the cleaning agents, it is better to wipe the grout with hot water.
This will ensure that the dust or sludge on the grout surface is cleaned.
2. Prepare a Cleaning Solution
Based on your tiles and grout and what’s needed, you can prepare any one of the following cleaning solutions.
Combine equal parts of vinegar and water in a spray bottle to make your own cleaning solution.
Spray the solution on the grout and let it stand for a few minutes. Then With the help of a small toothbrush or a scrub brush, scrub the grout.
You can also use an electric toothbrush for effective cleaning. However, Avoid using a metal scraper as it will scratch the tiles and loosen the grout.
This solution shouldn’t be used if you have porous tiles like marble. It will stain the tiles.
For marble tile and grout cleaning, make a mixture of two parts baking soda and one-part peroxide.
Apply this mixture to the grout and wipe it clean after a few minutes.
To effectively clean floor grout without scrubbing, you need a powerful cleaning solution.
To make such a solution mix ¼ cup white vinegar, seven cups of warm water, half a cup of baking soda, and ⅓ cup of household ammonia.
You can make a paste of two parts of baking soda and one part water to get rid of stubborn stains.
Apply the paste on the stains and leave it overnight. The next morning, scrub it with a soft brush and rinse with hot water.
3. Use a Sandpaper
You can use a sandpaper to clean the grout.
Fold the sandpaper and rub the creased edge along the grout to clean it. Wipe it with hot water once you finish cleaning.
4. Let it Dry Completely
Once you have finished cleaning the tiles and grout, let it dry for 24 hours at least. This will prevent staining.
5. Seal the Grout
Use a silicon-based grout sealer to seal the grout. This will protect the tiles from future stains.
Steam Cleaning Tile and Grout
This method is less expensive and less complicated than replacing the grout.
Steam cleaners have nozzles that direct high temperature steam directly on the grout.
So You doesn’t need harsh chemicals for steam cleaning. Focussing the steam on the grout and rubbing it would be enough to clean the floor grout.
Cleaning tile and grout is a time-consuming process and would test your patience. Let Dri & Kleen Home Services take care of your tile and grout cleaning in Boca Raton. Call them today at 305-742-1620.